User guide

3-60 Xerox WorkCentre C226 User Guide
Printer Operation
Store current configuration
This program is used to store the CONDITION SETTINGS (page 3-44) and the key
operator program PRINTER SETTINGS of (page 3-55) in memory. The stored settings
will remain in memory even if the main switch is turned off. To read the stored settings,
use the following [RESTORE CONFIGURATION] program.
This does not affect "Colour adjustments" in the PRINTER SETTINGS.
Restore configuration
This program is used to read the configuration that was stored using the [STORE
CURRENT CONFIGURATION] program and restore it as the current configuration.
The currently set configuration will change to the configuration read from memory.