User guide

3-30 Xerox WorkCentre C226 User Guide
Printer Operation
[Resolution Settings]
Select 300 dpi or 600 dpi.
Default setting: 600 dpi
[Graphics Mode]
Select [Raster] or [HP-GL/2]. Select [Raster] to print using raster graphics. Select
[HP-GL/2] to print using HP-GL/2 commands.
Default setting: HP-GL/2
Margin Shift
Use this setting to shift the document image to move the margin at the left, right, or
top of the paper. Select from [None], [10 mm.], [20 mm.], or [30 mm.].
Default setting: None
One-sided copying
Original image
Image shifted
to the right
Image shifted
to the left
Image shifted
to the bottom
Margin
MarginMargin
Two-sided copying
Original image
Image shifted
to the right
Image shifted
to the left
Image shifted
to the bottom
Margin
MarginMargin