User guide

Removing an Original Misfeed
Xerox WorkCentre C226 User Guide 2-79
Machine Maintenance (for Copying)
This section explains procedures for removing misfeeds in a DADF, cleaning the
machine, and troubleshooting.
Removing an Original Misfeed
Removing a misfed original from the DADF
If an original misfeed occurs in the DADF, follow the steps below to remove the misfed
original.
NOTES: • For misfeed removal in the main unit and other peripheral devices, see page 1-46.
• When a misfeed occurs, touch the [INFORMATION] key to display detailed
information for misfeed removal.
1. Removing misfeeds from each location
Check location A
Open the document feeding area cover and gently
remove the misfed original from the DADF tray. Close
the document feeding area cover.
Check locations A, B, and C in the diagram
at left to remove the original.
Document feeding area cover