User guide

2-78 Xerox WorkCentre C226 User Guide
Copier Operation
3. Make all other desired settings such as exposure, paper size and number of
copies and then press the [COLOUR COPY START ( )] or [BLACK COPY
START ( )] key.
When making black and white copying using the document glass in the sort mode,
replace the original with the next original and press the [BLACK COPY START]
key. Repeat this operation until all originals have been scanned. Then, touch the
[READ-END] key.
4. When the interrupt copy job is finished, touch the [CANCEL] key to turn off the
interrupt copy state.
5. Resume the interrupted copy job.
If a colour copy job was interrupted, replace the originals that have not yet been
copied and resume copying.
If a black and white copy job was interrupted, replace the originals that have not
yet been copied and press the [BLACK COPY START] key to resume copying.
Cancel