User guide

2-74 Xerox WorkCentre C226 User Guide
Copier Operation
4. Make all copier selections to be stored.
The number of copies cannot be stored.
5. Touch the [OK] key.
The selected settings will be stored under the register
number selected in step 3.
If a number key is selected in step 3 that has already been programmed.
A setting confirmation screen will appear. To replace the existing program with the
new program, touch the [STORE] key and continue from step 4. If you do not wish
to replace the existing program, touch the [CANCEL] key to return to the screen of
step 3 and select a different number key.
NOTE: If overwriting of programmed copy settings has been prohibited in the key operator
programs, you will not be able to store a job program.
Recalling a job program
1. Press the [#/P] key.
2. Touch the desired storage register number key to recall the job from memory.
When a number key is touched, the selection screen will
be closed and the stored job program will be recalled. A
number for which no job program has been stored can-
not be selected.
Special Modes
2-Sided Copy
Output
To Store, Make Selections And Press
[OK], To Delete, Press [Cancel].
A3
Pla
B
A4
A4
Duplex
And Press
ncel].
A3
Auto
Exposure
Auto
Original
Auto A4
Paper Select
100 %
Copy Ratio
Plain
Cancel OK
B5
A4
A4
Duplex
Job Programs
Press Program Number.
Recall