User guide

2-34 Xerox WorkCentre C226 User Guide
Copier Operation
5. Use the reduction, enlargement, and ZOOM ([ ], [ ]) keys to change the
copy ratio in the horizontal (X) direction.
A fixed ratio key will not become highlighted when
touched.
When the DADF is used, the ratio can only be set within
the range 50% to 200%.
The zoom keys can be used to change the ratio from
50% to 200% in increments of 1%.
Touch the [ ] key to increase the ratio, or the [ ]
key to decrease the ratio. If you continue to touch either
key for 3 seconds, the ratio begins to change quickly.
NOTE: Touch a reduction key or an enlargement key to set the approximate ratio, then touch
the [ ] key to decrease the ratio or [ ] key to increase the ratio.
6. Touch the [Y] key.
7. Use the reduction, enlargement, and ZOOM ([ ], [ ]) keys to change the
copy ratio in the vertical (Y) direction as you did for (X) in step 5.
Either copy ratio can be changed for fine-tuning until the next step is performed.
Zoo
m
Y
A
64%
50%
XY Zoom
100
50
Zoom
%
%
%
Y
A
X
1
4
%
%
2
XY Zoom
Cancel
100
50
Zoom
%
%
%
Y
A
X
1
4
%
%
2
XY ZOOM
CANCEL
Zoo
m
70%
Y
A
X
64%
50%
70
50
Zoom
%
%
0%
Y
A
X
1
4
4%
0%
2
XY Zoom
Cancel