User guide

2-24 Xerox WorkCentre C226 User Guide
Copier Operation
Automatic two-sided copying from the document glass
When a Duplex Module/2-Tray Unit and a Duplex Bypass/Inverter Unit are installed,
the following automatic two-sided copy function is possible. The copy paper is turned
over automatically, allowing easy two-sided copying.
NOTE: Certain restrictions exist depending on the amount of memory installed and the copy
settings. (See “Copy mode output restrictions” on page 2-16 and “Guidelines for the
number of scannable originals during sort copying” on page 2-17.)
1. Place an original on the document glass. (pages 2-4 to 2-10)
2. On the 2-Sided Copy display, touch the [2
Æ 2 SIDED COPY] key.
3. In the 2-Sided Copy display, touch the [1
Æ 2 Sided] key.
When making automatic two-sided copies of a one-sided A3 (11" x 17") or B4 (8-1/2" x
14") size portrait original, or when the front and back side of a two-sided original are
copied backwards:
a) In the 2-Sided Copy display, touch the [More...] key.
b) Touch the [BINDING CHANGE] key.
Original Copy
Example of a
portrait-oriented
original
Example of a
landscape-oriented
original