User guide

2-20 Xerox WorkCentre C226 User Guide
Copier Operation
The following two-sided modes can be
selected
1.Automatic two-sided copying from one-sided
originals
2.Automatic two-sided copying from two-sided
originals
3.Automatic one-sided copying from two-sided
originals
This function can be used even if a Duplex
Module/2-Tray Unit and/or a Duplex Bypass/
Inverter Unit are not installed.
1. Place the originals in the DADF tray. (pages 2-4 to 2-10)
2. In the 2-Sided Copy display, select a duplex copy mode.
Note: If 2
Æ 1 Sided copy mode is desired, you must
first touch the [More...] key.
3. Select the desired duplex copy mode.
The left screen shows the display when a DADF, a
Duplex Module/2-Tray Unit, and a Duplex Bypass/
Inverter Unit are installed. The display will vary depend-
ing on the equipment installed.
If a copy key is touched for a mode that cannot be
selected, a double beep will be sounded.
Original Copy
Sided Copy
Binding
Change
Ready To Copy.
Interrupt
OK
Example of a
portrait-oriented
original
Example of a
landscape-oriented
original