User guide

Storing, Deleting, and Using Original Sizes
Xerox WorkCentre C226 User Guide 2-11
4. Touch the original size key ( ) that you wish to store or delete.
To store an original size, touch a key that does not show
a size ( ).
Keys that already have an original size stored will show
the stored size ( ).
To delete or change a stored size, touch the key that
shows the size that you wish to delete or change.
• If you are storing an original size, go to step 5.
• To delete or change an original size, go to step 7.
5. Enter the X (width) and Y (length) dimensions of the original with the keys.
X (width) is initially selected.
Enter X and then touch the ( ) key to enter Y. A width
of 64 to 432 mm can be entered in X, and a length of 64
to 297 mm can be entered in Y.
6. Touch the [OK] key.
The original size entered in step 5 is stored in the key selected in step 4.
To exit, touch the [OK] key.
7. When you touch a key that shows an original size in step 4, a message screen
appears that contains the keys [CANCEL], [DELETE], and [STORE].
• To cancel the procedure, touch the [CANCEL] key.
• To delete the selected original size, touch the [DELETE] key.
• To change the original size stored in the key, touch the [STORE] key. The
screen of step 5 will appear to let you change the size.
8. To exit, touch the [OK] key.
Recall
Store/Delete
X68 Y78
X68 Y78
Cancel OK
420
297
(64 432)
mm
Recall
Y
X
A
X
Y
Store/Delete
(64 297)
mm