User guide

2-6 Xerox WorkCentre C226 User Guide
Copier Operation
NOTE: Original size detection function
One of the four groups of standard original sizes shown below can be selected for
detection by the original size detection function. The factory default setting is "AB-1
(INCH-1)". The setting can be changed using “Original size detector setting” in the key
operator programs.
* When the DADF is used, these sizes are only supported for one-sided originals.
Group
Detectable original sizes
DADF tray (for reversing single pass feeding) or document glass
1 INCH - 1 11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"*
2 INCH - 2 11" x 17", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"*
3 AB - 1 A3, A4, A4R, A5, B4, B5, B5R
4 AB - 2 A3, A4, A4R, A5, B5, B5R, 8-1/2" x 13"