User guide

2-2 Xerox WorkCentre C226 User Guide
Copier Operation
Original guides Adjust to the size of the originals (page 2-4).
Document
feeding area cover
Open to remove misfed originals in this area (page 2-79).
DADF right side
cover
Open to remove misfed originals (page 2-79).
Reversing tray Pull out to remove misfed originals.
Document
glass
All originals which cannot be copied from the DADF tray must be copied here.
Touch Panel (main screen of copy mode)
The main screen of copy mode shows messages and keys necessary for copying and
settings that can be selected. Touch a key to make a selection. The main screen of the
copy mode will be displayed when the [COPY] key is pressed.*
Message
display
Basic status messages are displayed here.
[INTERRUPT]
key display area
When interrupt copy is available, the [INTERRUPT] key will be displayed here. When
an interrupt copy job is being run, a [CANCEL] key will be displayed here to be used
for cancelling the interrupt copy job.
/
B5
A4
A4
DUPLEX
* Except when the custom set
-
tings screen is displayed.
The screen at left shows the
machine with the Duplex
Module/2-Tray Unit and the
Duplex Bypass/Inverter Unit
installed.
The image will vary depend-
ing on the equipment
installed.
1 2 3
10
4 5 86 7 9