Operation Manual

Copying
WorkCentre 7500 Series Multifunction Printer 81
User Guide
5. Touch Advanced Settings, and set the available options:
a. Under Side 1 Image, select one of the following:
 Image Inside Fold prints the image inside the fold.
 Image Outside Fold prints the image outside the fold.
b. Under Collation, select one of the following:
 Collated
 Uncollated
c. Under Originals, select one of the following:
 Standard images are printed full size.
 Booklet Format images are reduced and printed in booklet format.
6. To select the orientation of the originals, touch Original Orientation and select one of the following
from the drop-down menu:
 Upright Images are loaded upright into the document feeder.
 Sideways Images are loaded into the document feeder with the top edge to the left.
7. Touch Save.
Hole Punching Copies
If your printer has the Professional Finisher, or the Office Finisher LX with the hole punching option, you
can hole punch your copies.
Note: Some combinations of hole punching and stapling are not compatible. If a hole punch position
overlaps with a staple position, that option is not available.
To select hole punching:
1. Press the Services Home button, then touch Copy.
2. Under Copy Output, touch More.
3. Under Hole Punch, touch one of the following:
 2 Holes
 3 Holes
The sample page shows the location of the holes.
Note: Hole punching options depend on the paper size. If the desired hole punching option is
unavailable, touch Paper Supply, then select the appropriate tray and touch Save. Touch Help for
details.
4. Touch Save.
Stapling Copies
If your printer has the Professional Finisher or the Office Finisher LX, you can staple your copies.