Owner manual

Scan to FTP/SMB (Optional)
Copyright © 2008, Xerox Corporation. All rights reserved.
25
Procedure for Setup of Scan to FTP/SMB
To use Scan to PC (FTP/SMB) you need to enable the applicable Ports (SMB or FTP client)
on the Device, and make sure that an IP address has been set on the machine.
Note
The configuration can also be performed using CentreWare Internet Services. For
information on how to use CentreWare Internet Services, refer to the Internet
Services section of this guide.
1. Display the System Administrator Menu screen.
a. Press the Log In/Out button.
b. Enter the Login ID (11111) with the numeric keypad or the keyboard displayed
on screen, then touch Enter.
c. Press the Machine Status button on the Control Panel.
d. Touch the Tools tab.