Operation Manual

Using Apple
®
AirPrint™ with Xerox
®
ConnectKey™ Devices User Guide 5
How is AirPrint enabled and
configured on a Xerox
®
device?
AirPrint is enabled on Xerox devices by default. If, however, AirPrint has been disabled on
the Xerox device, an administrator can re-enable it following the steps below:
• You will need the device IP address or DNS name to access the AirPrint configuration
web interface from your browser. You can find the IP address at the device UI screen.
From the front panel in the device, go to the Machine Status menu and select the
Machine Information tab. The IP address will be shown on this page or you can select
Informational Pages button and select and print the configuration report.
• O
pen the Xerox
®
device’s web interface by entering the IP address of the Xerox
®
device into a web browser’s address box (http://<IP>). This will open the web interface.
• Click on the Properties tab (enter credentials if prompted: default administrative user
is: admin, password: 1111).
• Select Connectivity > Setup. This will bring up the Connectivity page in the right
frame.
• Under Protocols look for AirPrint.
• Select Edit on the AirPrint row.
• This will open the AirPrint configuration page.