Operation Manual

17 Glossary
Xerox WorkCentre 7132 User Guide 443
Default Screen A screen displayed immediately after switching on the power
or pressing the Clear All button. The screen is also displayed
when the Auto Clear feature is used.
Default Setting The settings used by the machine when the user does not
specify settings.
Default Value Values set on a preset screen.
Delayed Start Programming that enables the machine to process a
document at a later time.
Dial To use a telephone number for document transmission. The
methods of dialing provided by the machine include: manual
dialing using the numeric keypad, speed dialing, and using the
Address Book, etc.
Dial Tone A tone sounds from the telephone line when a remote
machine receives a call. You will then know that you are
connected to the line.
Dial Type The dial type of connected line. The machine offers Tone and
10 pps options.
Direct Fax Enables PC clients to send faxes via the machine.
Document In this guide, the image data generated when an original is
scanned. Used in terms such as transmitted document,
received document and pending document.
Document Feeder An assembly that automatically separates and feeds single- or
double-sided documents from the input tray into the scanner.
Double-sided Refers to a document that contains an image on both sides of
the page.
DPI An abbreviation of Dots Per Inch, which is the number of dots
that can be printed within a width of one inch. Used as the unit
for resolution.
Drum Cartridge A customer replaceable cartridge which contains a internal
drum. A printed image is formed on a drum before transferred
to paper.
Dual Tone Multi Frequency
(DTMF)
The use of a keypad sequence (tones) to transmit to, or poll
from, a remote mailbox.
Duplex Refers to a document that contains an image on both sides of
the page.
ECM An abbreviation of Error Correction Mode: An ITU-T approved
feature for Group 3 facsimile machines. ECM transmission
sends the document image data in segments and retransmits
segments that the remote machine receives incorrectly. “EC”
described on the Activity Report shows that the
communication was processed using ECM.