Operation Manual

Properties
Xerox WorkCentre 7132 User Guide 201
Protocol Settings HTTP
Allows you to configure the HTTP protocol settings as follows.
Port Number – Enter the port number that receives requests from the
browser.
Maximum Sessions – Enter the maximum number of sessions
between 1 and 15.
Connection Time-Out – Allows you to specify the connection time-out
period when transmission fails.
UPnP
Allows you to specify the port number for UPnP.
Port Number – Specify the UPnP port number.
SSDP
Allows you to configure the SSDP protocol settings as follows.
Valid Advertising Period – Specify the time during which the
advertising period remains valid.
Maximum TTL – Specify the maximum TTL (time to live).
LDAP
Allows you to configure the LDAP protocol settings as follows.
LDAP Server Address – Enter the LDAP server address.
Port Number – Specify the LDAP port number.
Web DAV
Allows you to configure the Web DAV protocol settings as follows.
Port Number – Specify the Web DAV port number.
Bonjour
Allows you to configure the Bonjour protocol settings as follows.
Host Name – Enter the host name.
Printer Name – Specify the printer name.
Emulation Settings Print Mode
Allows you to specify the type of printer language to use when a print
job is sent using USB, EtherTalk, SMB, NetWare, LPD, IPP, etc. Only
the enabled protocol will be displayed.
Auto – Allows you to set the machine so that it will automatically
determine and use the most suitable language to print data received
from the host device.
PostScript – Sets PostScript as the printer language.
HP-GL/2 – Sets HP-GL/2 as the printer language.
PCL – Sets PCL as the printer language.
TIFF – Sets TIFF as the printer language.
HexDump – Sets a hexadecimal dump as the raw language.
JCL – Allows you to enable or disable JCL. JCL is a command
independent of printer languages. You can specify the printer
language to use for the next job regardless of the printer language
that is currently being used.
Feature Setting items