Installation Guide

Installation Smart Card
Installation and Configuration Guide30
Configure Address Books
18. Select the Address Books tab.
a. LDAP was configured in a previous
step. If you require the Device
Address Book, select the Device
Address Book - Edit link.
b. Configure the Device Address Book. Instructions are available in the System Administration Guide.
Configure E-mail Defaults
19. Select the Defaults tab.
a. Select the required options for e-mail
default settings.
b. Save your changes.
Configure E-mail Compression
20. Select the Compression tab.
a. Select the required Compression
Settings.
b. Click Apply.
Configure E-mail Security
21. Select the Security tab.
a. Select Encryption/Signing - Edit.
b. Select the required Encryption
Enablement setting;
• Off -E-mail cannot be signed
• Always On - E-mail must be
signed
• Editable by user - E-mail can be
sent signed or unsigned
according to local user settings.
c. If you selected Editable by User,
select On for E-mail Encryption
Default if you require signing to be
on by default.
d. Select the required Encryption Algorithm.
e. Select Apply.