Installation Guide

Installation Smart Card
Installation and Configuration Guide24
Install a Domain Controller Certificate
7. Complete these steps if you want to install a domain controller certificate.
a. In the Properties tab select the
Security link.
b. Select Certificates > Security
Certificates.
c. Select the Domain Controller
Certificates tab.
d. Click Install Domain Controller
Certificate.
e. Click the Browse button and
navigate to the location of your
Domain Controller certificates.
f. Click Next.
g. Continue until all required certificates have been uploaded.
Configure SSL
8. SSL is used to provide a secure connection between your computer and the MFD when security certificates are
configured on the MFD. SSL is automatically enabled on the device. If you do not want to configure SSL,
proceed to Configure Certificate Validation on page 25.
a. In the Properties tab select the Connectivity link.
b. Select Setup.
c. In the Protocol list, select HTTP -
Edit.
d. If you want to Force Traffic over SSL,
select Yes (All HTTP requests will be
switched to HTTPS).
e. Select the required certificate from
the Choose Device Certificate drop-
down menu.
f. If you have changes to apply, select Save and the device will reboot automatically. If you have not made
any changes, select Cancel.