Installation Guide

Installation Smart Card
Installation and Configuration Guide18
Software Configuration
Enter the Smart Card Enablement Key
Before you configure the Smart Card solution, you need to enable the Smart Card feature on your Xerox® device
using Internet Services. The Feature Enablement Key is printed on the inside cover of the Enablement guide
provided within the Smart Card kit.
Follow the instructions below to enable the device software.
1. Access Internet Services
a. Open the web browser from your Workstation.
b. In the URL field, enter http:// followed
by the IP Address of the device. For
example: If the IP Address is
192.168.100.100, enter the following
into the URL field:
http://192.168.100.100.
c. Press Enter to view the Home page.
2. Access Properties
a. Select the Properties tab.
b. If prompted, enter the Administrator
User ID and Password. The default is
admin and 1111.
c. Select the Login button.
3. Enable the Smart Card software
a. Select the Properties link.
b. Select the
Login/Permissions/Accounting link.
c. Select the Login Methods link.
d. Select the Touc h UI Method button.