User's Manual

Installation and Setup
WorkCentre 6605 Color Multifunction Printer 95
User Guide
• Install a device certificate on the printer.
Note: To enable HTTPS, create a self-signed Certificate from the SSL page in CentreWare
Internet Services.
• Install a copy of the CA certificate that was used to sign the device certificate of the printer on the
other device.
Protocols such as LDAP and IPsec require both devices to prove their identity to each other.
Overview of Setting Up Digital Certificates
This is an overview of the steps to take to set up and use digital certificates:
1. Preparing the printer to manage digital certificates.
a. Changing the encryption settings of the hard drive.
b. Enabling HTTPS communications.
2. Importing and setting up digital certificates.
a. Importing the digital certificates.
b. Configuring the digital certificate purpose.
c. Verifying the digital certificate purpose.
3. Configuring desired security features to use the imported digital certificates.
Use the following topics to set up the digital certificates for your printer.
Before You Begin
Before you can manage certificates, do the following:
• Install the optional Productivity Kit (HD).
• Enable HDD Encryption. For details, see Configuring the Data Encryption Settings on page 93.
• Configure SSL. For details, see Configuring SSL settings on page 90.
Preparing to Manage Certificates
Some settings are available only when the encryption setting on the optional hard drive is enabled.
To use these settings, enable data encryption and set up an encryption key.
Note: All stored data is deleted after you change the Data Encryption Settings.
To enable data encryption of the hard drive: