User's Manual

Installation and Setup
42 WorkCentre 6605 Color Multifunction Printer
User Guide
3. Locate the plastic latch release on the Wireless Network Adapter protruding through the back of
the chassis.
4. Reach into the chassis and push inward, then back on the latch release to remove the Wireless
Network Adapter.
CAUTION: Do not use force to pull on the Wireless Network Adapter. If the latch is released
properly, the adapter pulls out easily. Pulling on the adapter can damage it.
5. Close the left door, then screw in the thumbscrew on the back of the door.
6. Using an Ethernet cable, connect the printer to your computer with a USB cable or through the
network.
7. Turn on the printer.
Resetting Wireless Settings
If the printer was previously installed in a wireless network environment, it could retain setup and
configuration information.
To prevent the printer from trying to connect to the previous network, perform the following steps:
1. At the printer control panel, press the Machine Status button.
2. Touch the Tools tab.
3. Touch Admin Setting > Network > Wi-Fi.
4. Touch the Down arrow to navigate to the next screen.
5. Touch Reset Wi-Fi > Reset > Yes, Reset.