User's Manual

Troubleshooting
WorkCentre 6605 Color Multifunction Printer 259
User Guide
If the problem persists, go to www.xerox.com/office/WC6605support for online support information.
Problems Receiving Faxes
Symptoms Causes Solutions
The received fax is blank. There is a problem with the telephone
connection or with the fax machine of
the caller.
Verify that the printer can make clean
copies. If it can, have the caller send
the fax again.
The sender loaded the pages
incorrectly.
Contact the sender.
The printer answers the call,
but does not accept incoming
data.
Not enough memory. If the job contains several graphics,
the printer could not have enough
memory. The printer does not answer
when memory is low. Delete stored
documents and jobs then wait for the
existing job to complete. This
increases available memory.
The received fax size is
reduced.
The paper supply in the printer does
not match the document size sent.
Confirm the original size of the
documents. Documents could be
reduced based on the available paper
supply in the printer.
Faxes cannot be received
automatically.
The printer is set to receive faxes
manually.
Set the printer to automatic reception.
The memory is full. Load paper if it is empty, and then
print the faxes stored in the memory.
The telephone line is incorrectly
connected.
Verify the telephone line connection.
If it is disconnected, connect it.
There is a problem with the fax
machine of the sender.
Make a copy to verify that your printer
is operating correctly. If the copy
prints correctly, have the recipient
verify their fax machine is operating
correctly.
If the problem persists, go to www.xerox.com/office/WC6605support for online support information.