User's Manual

Copying
WorkCentre 6605 Color Multifunction Printer 157
User Guide
Changing Lighten/Darken
1. Touch Lighten/Darken.
2. To change the lighten or darken default, touch the buttons to move the slider.
3. Touch OK.
Changing the Default for Sharpness
1. Touch Sharpness, then select an option.
2. Touch OK.
Changing the Saturation
1. Touch Saturation, then select an option.
2. Touch OK.
Changing Auto Background Suppression
1. Touch Auto Background Suppression, then select an option.
2. Touch OK.
Changing Auto Background Suppression Level
1. Touch Auto Background Suppression Level, then select an option.
2. Touch OK.
Changing the Default Color Balance
The Color Balance control allows you to adjust the print color of your printer. Each of the four primary
colors of red, green, blue, and gray balance, have five density settings. The density settings adjust
the output based on the level of color saturation. Adjusting the setting negatively lowers the density
and lightens the output. Adjusting the setting positively increases the density and darkens the output.
Examples of low density areas include faces and sky.
To change the default color balance:
1. Touch Color Balance.
2. Touch the color you want to adjust.
3. To adjust the default density setting from -3 through +3, touch - or +.
4. Touch OK.
Changing 2-Sided Copying
1. Touch 2-Sided Copying.
2. Touch one of the following:
• 1 - 1 Sided