User's Manual

Installation and Setup
13. To receive a fax while using the external telephone after hearing a fax tone:
a. Touch Remote Receive, then touch On.
b. Enter a two-digit tone code, then touch OK.
c. At the Restart System prompt, touch Close.
14. To instruct the printer what to do when it receives a document longer than the paper loaded in your
printer:
a. Touch Discard Size.
b. To have the printer print oversized faxes on two sheets of paper, select Off.
c. To have the printer reduce the size of the incoming fax so that it fits the selected paper, select
Auto Reduction.
d. To have the printer discard the data or image that falls outside the margins of the selected
paper, select On.
e. Touch OK.
f. At the Restart System prompt, touch Close.
g. Touch the Back arrow to return to the previous menu, or press the Services Home button to
return to Service Home.
Configuring Fax Transmission Defaults from the Control Panel
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch Fax Settings.
4. Touch Transmission Defaults.
5. To configure the printer to auto redial a busy number or a line that does not answer:
a. Touch Auto Redial Setup.
b. To change the number of redial attempts, touch Number of Redial, enter a number from 0–9,
then touch OK.
c. Touch OK.
d. At the Restart System prompt, touch Close.
6. To change the interval between the redial attempts:
a. Touch Redial Interval, then enter a number from 1–15 for the delay in minutes.
b. Touch OK.
c. At the Restart System prompt, touch Close.
7. To change the interval between resend attempts:
a. Touch Interval Timer, then enter a number from 3–255 for the delay in seconds.
b. Touch OK.
c. At the Restart System prompt, touch Close.
d. Touch the Back arrow to return to Transmission Defaults.
8. To select the dialing type for your outgoing faxes:
a. Touch Dial Type.
b. Select an option:
• PB uses push-button tone dialing.
66 Xerox
®
WorkCentre
®
6027 Multifunction Printer
User Guide