User's Manual

Maintenance
Adjusting the Altitude
Use Adjust Altitude to adjust the altitude to match that of the location where the printer is installed. If
the altitude setting is incorrect, it can cause print-quality problems.
To adjust the altitude:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Maintenance.
5. Touch Adjust Altitude.
6. To select an altitude from the list, touch it.
7. Touch OK.
8. To return to the Services Home menu, press the Services Home button.
Adjusting the Touchscreen
You can use the Adjust Touchscreen feature to calibrate the touch positions on the touchscreen.
To adjust the touchscreen:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Maintenance.
5. Touch Adjust Touchscreen.
6. Read the instructions, then touch OK.
7. Touch each cross as it appears.
Note: To improve the accuracy of the adjustment, to touch the center of each cross, use a stylus.
8. Touch OK.
9. To return to the Services Home menu, press the Services Home button.
Xerox
®
WorkCentre
®
6027 Multifunction Printer 163
User Guide