User's Manual

Maintenance
9. Repeat the process for the right side calibration lines, RY, RM, and RC.
10. Align a straight edge through the middle of the white zone in each of the PY, PM, and PC charts.
There is a number at the end of each chart that represents the middle of the white zone. Find the
number for the middle of the white zone and circle it.
11. Touch Enter Registration Value.
12. To enter values for each LY, LM, and LC fields, touch Plus (+) or Minus (-) to match the numbers that
you circled earlier.
13. Touch Next.
14. To enter values for each RY, RM, and RC fields, touch Plus (+) or Minus (-) to match the numbers that
you circled earlier.
15. Touch Next.
16. To enter values for each PY, PM, and PC fields, touch Plus (+) or Minus (-) to match the numbers that
you circled earlier.
17. Touch OK.
18. Print another Registration Chart, then repeat the process until you complete the color registration
corrections.
Refreshing the Bias Transfer Roller
Use the BTR Refresh procedure to reduce paper curling and improve paper discharge.
To refresh the bias transfer roller:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Maintenance.
5. Select BTR Refresh, then press Start.
162 Xerox
®
WorkCentre
®
6027 Multifunction Printer
User Guide