User's Manual

Maintenance
Performing an Automatic Color Registration Adjustment
Automatic color registration adjustment occurs every time a new toner cartridge is installed. You can run
this adjustment at other times as needed.
To perform an automatic color registration adjustment:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Maintenance.
5. Touch Color Reg Adjust.
6. Touch Auto Correct.
7. Touch Start.
8. To begin the calibration, press Start again.
Performing a Manual Color Registration Adjustment
Color Registration adjusts the printer to make corrections to blurry or hazy prints, or prints with color
halos.
To perform a color registration adjustment:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Maintenance.
5. Touch Color Registration.
6. Touch Print Registration Chart.
7. Touch Print.
8. Starting with the left side calibration lines, circle the line in each group where the color bar aligns
with the adjacent black bars.
Xerox
®
WorkCentre
®
6027 Multifunction Printer 161
User Guide