User's Manual

Maintenance
5. Touch Adjust BTR.
6. Select the paper type for the adjustment.
7. To increase or decrease the amount of offset. touch Plus (+) or Minus (-), then touch OK.
8. Repeat this procedure for each paper type you need to adjust.
Adjusting the Fuser
Use Adjust Fuser for optimum print quality across a wide range of paper types. If the toner on a print is
smearing or can be rubbed off the paper, increase the offset for the paper you are using. If the toner is
blistered or mottled, decrease the offset for the paper you are using.
To adjust the fuser:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Maintenance.
5. Touch Adjust Fuser.
6. Select the paper type for the adjustment.
7. To increase or decrease the amount of offset. touch Plus (+) or Minus (-), then touch OK.
8. Repeat this procedure for each paper type you need to adjust.
Color Registration
The printer automatically adjusts the color registration when automatic adjustment is turned on. You
can also adjust color registration manually any time the printer is idle. You must adjust the color
registration any time the printer is moved. If you are having printing problems, adjust the color
registration.
Setting Automatic Color Registration
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Maintenance.
5. Touch Auto Reg Adjust.
6. Touch On, then touch OK.
7. To navigate back to Maintenance, touch the Back button.
160 Xerox
®
WorkCentre
®
6027 Multifunction Printer
User Guide