User's Manual

Maintenance
Adjustments and Maintenance Procedures
This section includes:
• Adjusting for the Paper Type ..................................................................................................................................... 159
• Adjusting the Bias Transfer Roller ........................................................................................................................... 159
• Adjusting the Fuser ....................................................................................................................................................... 160
• Color Registration .......................................................................................................................................................... 160
• Refreshing the Bias Transfer Roller ......................................................................................................................... 162
• Adjusting the Altitude .................................................................................................................................................. 163
• Adjusting the Touchscreen ......................................................................................................................................... 163
Adjusting for the Paper Type
Use Adjust Paper Type to compensate for paper thickness within a paper type. If the printed image is
too light, use a heavier setting for the paper you are using. If the printed image is mottled or
blotchy-looking, decrease the setting for the paper you are using.
To adjust the paper type:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Maintenance.
5. Touch Adjust Paper Type.
6. Touch Plain or Labels.
7. To select the weight range of the paper, touch Lightweight or Heavyweight.
8. To return to the Services Home menu, press the Services Home button.
Adjusting the Bias Transfer Roller
Use Adjust BTR to specify the bias transfer roller (BTR) voltage for printing on the selected paper type. If
the printed image is too light, increase the offset for the paper you are using. If the printed image is
mottled or blotchy-looking, decrease the offset for the paper you are using.
To adjust the bias transfer roller:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Maintenance.
Xerox
®
WorkCentre
®
6027 Multifunction Printer 159
User Guide