Operation Manual

Maintenance
Xerox
®
WorkCentre
®
6025 Multifunction Printer 137
User Guide
Refreshing the Toner
Toner Refresh recalibrates toner concentration and developer voltages. If you print documents with high
or low ink coverage, Toner Refresh can optimize print quality.
To refresh the toner:
1. On the printer control panel, press the System button.
2. To select Admin Menu, press the arrow buttons, then press OK.
3. Select Maintenance, then press OK.
4. Select Toner Refresh, then press OK.
5. To select the toner to refresh, press the arrow buttons, then press OK.
6. Select Yes, then press OK.
The process runs automatically. Wait three minutes for the process to complete and the printer to
return to Ready.
Note: Do not use this procedure repeatedly for a single toner color. Running the procedure
repeatedly uses the toner supply more quickly.
Cleaning the Developer
The Clean Developer feature runs the developer motor and mixes the toner in the developer. Use the
Clean Developer feature to refresh the toner after replacing a toner cartridge or if dark streaks are
appearing in your prints.
To clean the developer:
1. On the printer control panel, press the System button.
2. To select Admin Menu, press the arrow buttons, then press OK.
3. Select Maintenance, then press OK.
4. Navigate to Clean Developer, then press OK.
5. Select Yes, then press OK.
The process runs automatically. Wait three minutes for the process to complete and the printer to return
to Ready.