Operation Manual

General Care and Troubleshooting WorkCentre
®
5945/5955
User Guide 711
Loading Tray 3
Loading Tray 4
Loading the Bypass Tray and Changing the Tray Settings
The finisher does not stack the output correctly
• Unload the finisher tray frequently especially if stacking mixed-size paper.
• Do not remove stapled sets while the finisher is compiling.
• Check the paper tray guides are locked into position against the paper.
• When using large paper, remove any output contained in the Stacker Tray.
• Load the paper in the paper trays with the seam side of the paper up. Load the paper in the
Bypass Tray with the seam side down.
• Load non-standard media in the Bypass Tray.
• If the paper curls excessively, flip the paper over in the applicable paper tray.
• Check the correct paper size has been selected for the paper loaded in the tray.
• Check that the printer is not positioned near a source of draft.
• Check the correct paper type, such as the weight, has been selected for the paper loaded in the
tray.
More Information
Loading Tray 1 and Changing the Tray Settings
Loading Tray 2 and Changing the Tray Settings
Loading Tray 3
Loading Tray 4
Loading the Bypass Tray and Changing the Tray Settings
Paper curls
Storing Paper and Other Media
The centre output tray does not stack the output correctly
• Unload the centre output tray frequently especially if stacking mixed-size paper.
• Load the paper in the paper trays with the seam side of the paper up. Load the paper in the
Bypass Tray with the seam side down.
• Load non-standard media in the Bypass Tray.
• If the paper curls excessively, flip the paper over in the applicable paper tray.
• Check the correct paper size has been selected for the paper loaded in the tray.
• Check that the printer is not positioned near a source of draft.
• Check the correct paper type, such as the weight, has been selected for the paper loaded in the
tray.
More Information
Loading Tray 1 and Changing the Tray Settings
Loading Tray 2 and Changing the Tray Settings
Loading Tray 3
Loading Tray 4
Loading the Bypass Tray and Changing the Tray Settings
Paper curls
Storing Paper and Other Media