Operation Manual

General Care and Troubleshooting WorkCentre
®
5845/5855/5865/5875/5890
670 User Guide
Replacing the Ozone Filter
The Ozone Filter is a replaceable unit on the device. You will be notified by the device when the
module needs replacing.
WARNING: When replacing consumables do NOT remove the covers or guards that are fas-
tened with screws. You cannot maintain or service any of the parts that are behind these cov-
ers and guards. Do NOT attempt any maintenance procedure that is NOT specifically
described in the documentation supplied with your device.
1. Open the Waste Toner Bottle door on the device.
2. Remove the Ozone Filter.
3. Replace the used consumable with the new consumable.
Note: For more detailed instructions see the device touch screen or the instructions provided
with the replacement consumable.
4. Close the Waste Toner Bottle door on the device.
More Information
Identifying the Replaceable Units
Replacing the Fuser Module
Staple Cartridges and Hole Punch Waste
Staple Cartridges
Replacing the Staple Cartridge in the Basic Office Finisher
If your device is equipped with a finisher, or a convenience stapler, you will be required to replace
the staple cartridge or cartridges when the device displays a message instructing you to do so.
1. Open the finisher door and locate the staple cartridge unit.
2. Pull the cartridge handle to release the cartridge.
3. Remove the staple cartridge.
4. Install the replacement staple cartridge.
Note: For more detailed instructions see the device touch screen or the instructions provided
with the new staples.
5. Ensure the staple cartridge is latched correctly.
6. Close the finisher door.
More Information
Replacing the Staple Cartridge Office Finisher
Replacing the Staple Cartridges in the High Volume Finisher and Booklet Maker
Replacing the Staple Cartridges in the Office Finisher with Booklet Maker
Replacing the Staple Cartridge in the Convenience Stapler