Operation Manual

General Care and Troubleshooting WorkCentre
®
5845/5855/5865/5875/5890
668 User Guide
More Information
Replacing the Toner Cartridge
Replacing the Xerographic Module and Transfer Unit
Replacing the Fuser Module
Replacing the Waste Toner Bottle
Replacing the Ozone Filter
Replacing the Toner Cartridge
The Toner Cartridge is a replaceable unit on the device. You will be notified by the device when the
cartridge needs replacing.
WARNING: When replacing consumables do NOT remove the covers or guards that are fas-
tened with screws. You cannot maintain or service any of the parts that are behind these cov-
ers and guards. Do NOT attempt any maintenance procedure that is NOT specifically
described in the documentation supplied with your device.
1. Open the front door on the device.
2. Release the Toner Cartridge.
3. Replace the used consumable with the new consumable.
4. Latch the Toner Cartridge.
5. Close the front door of the device.
More Information
Identifying the Replaceable Units
Replacing the Xerographic Module and Transfer Unit
The Xerographic Module is a replaceable unit on the device. You will be notified by the device when
the module needs replacing.
WARNING: When replacing consumables do NOT remove the covers or guards that are fas-
tened with screws. You cannot maintain or service any of the parts that are behind these cov-
ers and guards. Do NOT attempt any maintenance procedure that is NOT specifically
described in the documentation supplied with your device.
1. Open the front door on the device.
2. Release the Xerographic Module.
3. Replace the used consumable with the new consumable.
Note: For more detailed instructions see the device touch screen or the instructions provided
with the replacement consumable.
4. Latch the Xerographic Module.
5. Close the front door of the device.
More Information
Identifying the Replaceable Units
Cleaning the Xerographic Module using the Tools Menu