Operation Manual

Getting Started WorkCentre
®
5845/5855/5865/5875/5890
User Guide 57
If a job is held in the list, it may require additional resources or a secure code to print. The reason
for the held status is displayed on the Job Progress screen. Once the requirement has been met or
the correct secure code entered, the job is released for printing.
More Information
Viewing the Progress and Details of a Job using the Job Status Menu
Maintenance and Consumables
Identifying the Replaceable Units
There are several consumables on the device that need replenishing or replacing, such as paper,
staples, and customer replaceable units.
1. Toner Cartridge
2. Xerographic Module
3. Fuser Module
4. Waste Toner Bottle
5. Ozone Filter
The device will display a message on the touch screen when any of the units need to be re-ordered.
This message is a warning that the unit is nearing the end of its life. Only replace the unit when a
message actually instructs you to do so.
WARNING: When replacing consumables do NOT remove the covers or guards that are fas-
tened with screws. You cannot maintain or service any of the parts that are behind these cov-
ers and guards. Do NOT attempt any maintenance procedure that is NOT specifically
described in the documentation supplied with your device.
More Information
Replacing the Toner Cartridge
Replacing the Xerographic Module and Transfer Unit
Replacing the Fuser Module
Replacing the Waste Toner Bottle
Replacing the Ozone Filter