Operation Manual

Scan WorkCentre
®
5845/5855/5865/5875/5890
282 User Guide
Accessing the TWAIN Scan Driver Help Pages
The Xerox TWAIN scan driver scans images directly to your computer. The TWAIN driver can be
used by many popular software applications to import scanned images. The scan driver allows you
to use the specific features available on your device.
Your System Administrator can configure access to the remote scanning feature. If scanning to your
application is not available or does not work, ask your System Administrator to enable the remote
scanning feature and install the Xerox TWAIN scan driver.
Refer to the System Administrator Guide for further information.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
2. Press the Clear All button on the control panel to cancel any previous programming selections.
3. Using your computer, open the application you wish to scan the image to.
4. Begin the import process. From most applications select File, then select Import.
5. If required, follow any instructions within your application until you are given the opportunity
to choose a scan driver or scanner.
6. If required, select the device required from the list of scanners available.
7. If required, select the Xerox TWAIN driver from the list of drivers available.
8. Click the ? button. You will be directed to the Xerox online help in your default internet browser.
More Information
System Administrator Guide www.xerox.com/support.
Using Internet Services to find System Administrator Contact Details