Operation Manual

Getting Started WorkCentre
®
5845/5855/5865/5875/5890
User Guide 21
• The High Volume Finisher is also available with a Booklet Maker which enables booklets to be
folded and stapled. Folded sheets and booklets are delivered to the booklet tray which can hold
between 10 and 30 booklets, depending upon the number of pages. If the flap on the right of
the tray is folded down, an unlimited number of booklets can be collected in a suitable
container.
• If you have a High Volume Finisher with Booklet Maker, a Tri-fold module can also be fitted. This
enables your device to produce tri-folded output. With the Tri-fold module fitted, the capacity
of the finisher stacker tray is reduced to 2000 sheets and a maximum paper weight of 120 gsm
(32lb).
Identifying the Control Panel Buttons
1. Services Home: Provides access to the services available on the device.
2. Services: Returns the display to the previous Copy, Fax, or Scan feature screen when the Job
Status screen or Machine Status screen is displayed.
3. Job Status: Use to check the progress of active jobs, or display detailed information about
completed jobs.
4. Machine Status: Use to check the device status, the billing meters, the status of consumables,
or print the user documentation and reports. Use this button also when accessing the Tools
mode.
5. Touch Screen: Use to select programing features and display fault clearance procedures and
general device information.
6. Log In/Out: Use to enter log in details, and to log out.
7. Help: Displays help messages for device features.
8. Numeric Keypad: Use to enter alphanumeric characters.
9. Dial Pause: Use to insert a pause when dialing a fax number.
10. ‘C’ Cancel Entry: Cancels the previous entry made on the Numeric Keypad.
11. Language: Use to select a different language for the touch screen options.
12. Power: Use to select Energy Saver mode, perform a quick restart or to power on or off the
device.
13. Clear All: Press once to clear a current entry. Press twice to return to default settings.
14. Interrupt Printing: Use to pause the job which is currently printing, to run a more urgent copy
job.
15. Stop: Stops the job in progress.
16. Start: Use to start a job.