Manualshelf

Operation Manual

ManualsBrandsXerox ManualsPrinter Scanner CopierWorkCentre 5890
12345678910
Getting Started WorkCentre
®
5845/5855/5865/5875/5890
8 User Guide
10. Offset Catch Tray: The optional offset catch tray delivers output collated or uncollated. Each
set or stack will be offset from the previous to enable easy separation.
11. Basic Office Finisher: This optional device stacks, collates, staples and offsets your output.
12. Office Finisher: This optional device stacks, collates, staples and offsets your output. Hole
punch kits can be installed with this finisher.
13. Office Finisher with Booklet Maker: This optional finisher creates booklets, collates, offsets,
stacks and staples your output. Hole punch kits can be installed with this finisher.
14. High Volume Finisher: This optional finisher collates, offsets, stacks and staples your output.
Hole punch kits can be installed with this finisher.
15. High Volume Finisher with Booklet Maker: This optional finisher creates booklets, collates,
offsets, stacks and staples your output. Tri-fold and Hole Punch kits can be installed with this
finisher.
16. Convenience Shelf: An optional shelf used for holding documents or the Convenience Stapler.
17. Convenience Stapler: Optional stapler used to staple sheets if there is no finisher, or to re-
staple originals after copying.
Note: SEF is Short Edge Feed (where the short edge of the paper is the leading edge when the
paper is fed into the device). LEF is Long Edge Feed (where the paper is oriented so that the long
edge is fed into the device first).
Locating the Serial Number for Your
Device
If you need assistance during or after product installation, please visit www.xerox.com for online
solutions and support.
If you require further assistance, call our experts at the Xerox Support Center, or contact your local
representative. When telephoning please quote the machine serial number.
The Xerox Support Center or local representative telephone number is provided when the device is
installed.
1. To access the serial number open the front door. The serial number is located on a label above
the fuser module.