Operation Manual

Print WorkCentre
®
5845/5855/5865/5875/5890
290 User Guide
11. Print jobs are usually shown in the Active Jobs list, however if your System Administrator has
enabled the Hold All Jobs feature, your job will be listed in either the Held Print Jobs or the
Unidentified Print Jobs list. Select the job in the required list and select the Release button to
print the sample set.
12. Check the printed sample is correct.
13. Select the job required from the list.
• If the sample is correct, select the Release button to print the remaining sets.
• If the sample has not printed as you expected it to, select the Delete button.
14. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the Details button. Once the resources are available
the job will print.
More Information
Printing a Document using the PCL Print Driver
Using the Job Type Feature with the PCL Print Driver
Releasing a Held Job using the Job Status Menu
System Administrator Guide www.xerox.com/support.
Using Internet Services to find System Administrator Contact Details
Viewing the Progress and Details of a Job using the Job Status Menu
Printing a Delay Print Job using the PCL Print Driver
You can print to the device from your computer through a print driver. There are a variety of Xerox
print drivers available for the device to support all the popular operating systems. The Xerox print
drivers allow you to use the specific features available on your device.
If Authentication has been enabled on your device you may have to login at the device to see or
release your jobs.
If Accounting has been enabled you may have to enter login details at the print driver before you
can send your job.
Use the Delay Print option to print your document at a specified time, up to 24 hours after the
original job submission. This is useful if you want to print large jobs during quiet times in your office,
or if you want all your jobs to print at the same time.
1. Open the document to be printed. From most applications select the Office button or select
File, then select Print from the file menu.
2. Enter the number of copies you want to produce. Depending on the application you are using
you may also be able to select a page range and make other print selections.
3. Select the Xerox PCL driver from the list of print drivers available.
4. Open the print driver Properties window - the method will vary depending on the application
you are printing from. From most Microsoft applications select the Properties or Preferences
button to open the window.
5. If required, click the Printing Options tab. This is usually the active tab when the print driver
opens.
6. Select Delay Print from the Job Type dropdown menu.
7. Select the Time to Print entry box and use your keyboard to enter a time when your job should
print.
8. Click the OK button.