Operation Manual

Scan WorkCentre
®
5845/5855/5865/5875/5890
280 User Guide
• Use the special characters button to access special characters such as $ and %.
• Buttons with an icon in the lower right corner have accented or additional characters
available. Select and hold the button to view related characters in a pop-up menu. Select
the desired character from the pop-up menu.
6. Select the OK button.
7. Press the Start button on the control panel to scan the original.
8. Remove the original from the document feeder or document glass when scanning has
completed.
9. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
More Information
Using a User ID to Log In at the Device
System Administrator Guide www.xerox.com/support.
Using Internet Services to find System Administrator Contact Details
Remote Scan
Scanning an image using the Xerox TWAIN Scan Driver
The Xerox TWAIN scan driver scans images directly to your computer. The TWAIN driver can be
used by many popular software applications to import scanned images. The scan driver allows you
to use the specific features available on your device.
Your System Administrator can configure access to the remote scanning feature. If scanning to your
application is not available or does not work, ask your System Administrator to enable the remote
scanning feature and install the Xerox TWAIN scan driver.
Refer to the System Administrator Guide for further information.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
2. Press the Clear All button on the control panel to cancel any previous programming selections.
3. Using your computer, open the application you wish to scan the image to.
4. Begin the import process. From most applications select File, then select Import.
5. If required, follow any instructions within your application until you are given the opportunity
to choose a scan driver or scanner.
6. If required, select the Xerox TWAIN driver from the list of drivers available.
7. If required, select the device required from the list of scanners available.
8. Select the Scan Size option required.
• Auto lets the scanner detect the image size automatically.
• Mixed Size Originals programs scan sets using source pages of different sizes.
• Standard Paper Sizes accepted by the scanner are listed.