Operation Manual

Getting Started WorkCentre
®
5845/5855/5865/5875/5890
User Guide 23
Using the Energy Saver Option
Energy Saver ends the current session and keeps the device running on low power. When in Energy
Saver Mode, press the Power button to wake up the device.
1. Press the Power button on the control panel.
2. Select the Energy Saver button on the touch screen.
3. Select the Energy Saver button again to confirm that the device should go into the Energy
Saver state.
Note: When Energy Saver mode is confirmed the device will immediately enter Low Power
mode. If Sleep mode has been configured, the device will then enter Sleep mode after a
specified period of time.
Note: The Power button is illuminated when the device is in the Energy Saver state. A steady
light indicates the device is in Low Power mode. A flashing light indicates the device is in Sleep
mode.
4. To re-activate the device when in Low Power or Sleep mode, press the Power button. The device
takes longer to recover from Sleep mode.
More Information
Powering the Device Off
Loading Documents
Original documents can be loaded either into the document feeder or onto the document glass.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or