Operation Manual

Multiple Account Mode
Xerox WorkCentre 5016/5020 User Guide 74
Setting Copy Job Limits on a User Account
To set the copy job limit on a user account, you must first log in to the machine under
the System Administrator’s account, and then enter the System Setting Mode.
The following procedure describes how to set a copy job limit on a particualr user
account using the System Administrator’s account.
1. When the machine is in the Multiple
Account Mode, [Id] appears blinking in
the Display. Enter the System
Administrator’s account number “0”
using the numeric keypad.
[0] appears in the Display.
2. Press the <Start> button to confirm the
entered account number.
3. Enter the System Administrator’s
password using the numeric keypad.
Note • The default System Administrator’s
password is "111".
For security reasons, as you enter each
digit of the password, a hyphen appears
in the Display instead of the actual
number that you enter.
Numeric keys
<Start> button
Numeric keys