Manualshelf

Administrator's Guide

ManualsBrandsXerox ManualsmultifunctionalsWorkCentre 4265
61626364656667686970
Security
Xerox
®
WorkCentre
®
4265 Multifunction Printer 67
System Administrator Guide
Enabling and Configuring 802.1X at the Control Panel
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Network Settings > Advanced Settings.
3. Touch 802.1X.
4. Touch Enable.
5. Touch Authentication Method, then select the method used on your network.
Notes:
• When the printer is in FIPS 140 mode, EAP-TLS authentication is required.
• To configure 802.1X settings for EAP-TLS, use CentreWare Internet Services.
6. Touch Username.
7. Using the touch screen keyboard, type the user name and server that your authentication switch
requires. Touch OK.
8. Touch Password, then type the password using the touch screen keyboard. Touch OK.
9. Touch OK again.