Operation Manual

4 Fax
Xerox WorkCentre 4150 User Guide 39
1. Press the All Services button on the touch screen.
2. Select Fax on the touch screen. Ensure that the Fax screen is displayed.
NOTE: If the Authentication feature is enabled, you may need an account
number before using the machine. To get an account number, or for more
information, contact the Key Operator or the System Administrator.
3. Press the Clear All button once on the control panel to cancel any
previous selections. The control panel returns to the default Entry
screen.
4. Select the button for the feature required.
If necessary, press one of the tabs and configure the fax settings. For
information on the individual tabs, refer to the following:
Basic Faxing - page 42
Image Adjustment - page 45
Added Fax Features - page 47
Feature Description
Basic Faxing
Use this tab to select the standard options for a fax job,
e.g. dial options, resolution, sides scanned, etc.
Image Adjustment
Use this tab to adjust the appearance of the copy output,
e.g. image quality, color mode, etc.
Added Fax
Features
Use this tab to access the advance fax features, e.g.
reports, mailboxes, poll settings, etc.