Operation Manual

2 Getting Started
Xerox WorkCentre 4150 User Guide 15
After your machine is installed, it is recommended that the settings and
options are customized to fully meet the requirements of the Users. Please
discuss your requirements with your System or Machine Administrator to
ensure you get optimum performance from your machine.
The Tools facility is accessed using the Access button on the control panel.
Some of the settings within Tools are critical to the operation of the machine,
therefore the screens are password protected so they cannot be accidentally
changed or corrupted.
For full instructions on accessing and customizing the System Management
Tools,
refer to Setups chapter on page 107.
System Management Tools include:
For Further Assistance
Access the Online
Help:
Press Help at any time to access the online help screens. Messages, screen
instructions and graphics provide additional information.
For additional Help If you need any additional help on using your machine you can:
1) Refer to the Getting Started Guide or the System Administration
CD, contained in the CD Pack delivered with your machine.
2) Contact your System and/or Machine Administrator.
3) Visit our Customer Web Site at www.xerox.com or contact the Xerox
Welcome and Support Centre quoting the machine serial number.
Press the Machine Status button on the control panel.
NOTE: The serial number can also be found on a metal plate inside the front
door.
System Settings Fax Setups
Screen Defaults Online / Offline
Access and Accounting Optional Services
Feature Defaults Software Reset
Connectivity and Network Setup Customer Support & Supplies
Numbers
Supplies Management Power Saver Administration
Machine Tests