Operation Manual

2 Getting Started
8 Xerox WorkCentre 4150 User Guide
Powering on the Machine
1. Connect the AC Power Cord to the machine and a power outlet. The
power cord must be plugged into a grounded power socket.
2. Press the ON/OFF switch
to the ON (I) position. As
the machine boots up, the
display is blank until the
message “Please
Wait...Machine self test in
progress“ appears on the
display.
3. To power OFF, press the
ON/OFF switch again to
the (O) position.
Interrupt Printing
Press to stop current print job and perform a local job.
Stop
Press to cancel current job.
Start
Press to begin local job.
Display Brightness Adjust to lighten or darken the control panel display touch
screen.
Feature Description
ON/OFF
switch
AC Power
Cord