Operation Manual

12 Troubleshooting
174 Xerox WorkCentre 4150 User Guide
CRU
Toner Low Toner cartridge is almost
empty.
Open side cover and right side
front door.
Remove toner cartridge and gently
shake it. By doing this, printing
operations can be temporarily
resumed.
Reinstall toner cartridge.
Reorder toner cartridge.
Toner Empty Toner cartridge is empty. Open side cover and right side
front door.
Replace with new toner cartridge.
Drum Warning The drum cartridge is near
the end of life.
Ensure a replacement cartridge is
in stock.
Replace Drum The drum cartridge has
reached the end of life.
Replace the SMart Kit
TM
Drum
Cartridge.
Toner Cartridge Not
Installed
The toner cartridge is not
installed, or is not installed
correctly.
Install the toner cartridge.
If already installed, check it has
been installed correctly.
If problem persists, call for service.
Toner Supplying Error Toner is not being supplied
correctly.
Remove the seal tape from the
SMart Kit Drum Cartridge.
Check the toner cartridge is
installed securely.
Invalid Toner Cartridge The installed toner cartridge
is not a valid Xerox cartridge.
Check the toner cartridge and
install a valid Xerox cartridge if
necessary.
If problem persists, call for service.
Invalid Drum Cartridge The installed drum cartridge
is not a valid Xerox cartridge.
Check the drum cartridge and
install a valid Xerox cartridge if
necessary.
If problem persists, call for service.
Finisher
Finisher Jam Copy paper jammed in
finisher.
Open finisher front cover and
remove jammed paper in the
finisher and fuser area.
Full Stack Output tray full. Remove printed material from
Output tray.
Staple Cartridge Not
Installed
Staple cartridge not installed. Install staple cartridge.
Door Open Finisher door open. Close finisher door.
Errors & Faults Description Solution