Operation Manual

9 Setups
Xerox WorkCentre 4150 User Guide 131
message will be displayed telling you to order a new toner cartridge. You can
set the percentage level the message displays using the scroll buttons.
When the Toner Cartridge Reorder Notification threshold is reached a
message will be displayed. Once you have a new toner cartridge you can turn
the message off by selecting the Cancel Current Re-order Message(s)
button. The machine will display a message when it is time to install the new
toner cartridge.
When the Toner Cartridge Status is Disabled, the machine will not predict the
toner usage and you will not receive a re-order reminder. The Machine Status
- Service Information screen will say that the toner monitoring function is
disabled. When the machine has run out of toner you will be told to replace the
toner cartridge.
If you replace the toner cartridge when instructed to do so by the message on
the display, the machine will assume that you have installed a new toner
cartridge and reset the toner usage counters. However, if you choose to install
a new toner cartridge before the message is displayed you will have to reset
the toner usage counters manually by selecting the Confirm New Toner
Cartridge Has Been Installed button.
Counter Resets
Other replaceable units within the machine also track the number of images
made as a measure of their life expectancy. These include:
• Fuser Counter
• Bias Transfer Roller Counter
• Feed Rollers Counter
• Document Feeder Friction Pad Counter
At the end of life, these units continue running without re-order notification
messages. On replacement, the Counter Reset buttons should be used to
reset the counters to zero.
Go To Tools > More > Supplies Management