Operation Manual

9 Setups
128 Xerox WorkCentre 4150 User Guide
Feature Default and Priority Order
Use this feature to select a service from the list and use the buttons to increase
or decrease its priority. The highest priority service will be displayed as the
default service on the machine within the Features pathway. The next two
services will be displayed as buttons in the Features pathway. Any remaining
services will be accessible through the All Services button.
Display Brightness
Depending on where your machine is located, you may wish to adjust the
touch screen display in order to minimize glare and improve readability. Use
the adjustment knob to the left of the touch screen to adjust the brightness of
the user interface screen to suit the ambient light levels.
Audio Tones
Use this feature to enable or disable one of the following audio tones:
When enabled, the tones can be set to either low, medium or high. Press the
Test button to test the tone volume. Select Save to confirm the settings.
Go To Tools > Systems Setting > Audio Tones
Touch ScreenDisplay Brightness
Tone Description
Fault Tone Sounds when there is a fault on the machine
Conflict Tone Sounds when there is a system setting conflict
Selection Tone Sounds when a button is selected