Operation Manual

8 Paper and other Media

100 Xerox WorkCentre 4150 User Guide

 The paper trays

can hold a maximum of

520 sheets of 20 lb (80

g/m

) bond paper.

3. Fan the paper and insert it into the tray. If loading Letterhead, ensure the

design is face-up and the top edge of the sheet is placed at the right side.

CAUTION: Do not fill above the Maximum Fill Line.

4. Position the side guide by

squeezing the lever and sliding it

towards the stack of paper, until it

gently touches the side of the

stack. Do not allow the guide to

press against the edge of the

paper tightly.

5. Close the paper tray.

 When printing from

your PC, ensure you

select the Select Paper

button to specify the

correct paper size, color

and type. Not confirming

the paper details may

result in printing delays.

6. The UI screen shows the current paper supply settings for Tray 1 on the

left hand side. Press the Change Size button and/or the Change Type

and Color button to change the settings if necessary. If the settings are

correct, press the Confirm button. Please refer to Setting the Paper Size

in the Paper and other Media chapter on page 103.

Max Fill Line

Side Paper

Guide