User's Manual

Installation and Setup

32 Xerox

WorkCentre

3615 Black and White Multifunction Printer

User Guide

Installation and Setup Overview

Before printing, your computer and the printer must be plugged in, turned on, and connected. Configure

the initial settings of the printer, then install the driver software and utilities on your computer.

You can connect to your printer directly from your computer using USB, or connect over a network using

an Ethernet cable or wireless connection. Hardware and cabling requirements vary for the different

connection methods. Routers, network hubs, network switches, modems, Ethernet cables, and USB cables

are not included with your printer and must be purchased separately. Xerox recommends an Ethernet

connection because it is typically faster than a USB connection, and it provides access to CentreWare

Internet Services.

Note: If the Software and Documentation disc is not available, you can download the latest drivers

from www.xerox.com/office/WC3615drivers.